Mold Pre-heating & Descaler - Booyeo Tempcon Co., Ltd.

Home > Buy Now > Printing Machinery > Mold Pre-heating & Descaler

To Korean Page

visitors: 733

Booyeo Tempcon Co., Ltd.
[Korea]

Address:
#236-12, Dangjeong-dong Gunpo-si Gyeonggi-do 435-831 Korea

Phone:
82-31-4521122

Contact name:
Mi-hwa, Kang , President

Click to enlarge image

Feature

Maximizes the cooling efficiency with elimination of calcium and magnesium scales in the mold cooling pipes by using groundwater and industrial water (Thermal Efficiency Enhancing Effect).
Enhances the preheating (53%) and operational efficiency, and the productivity (80%).
Prevents clogging in the mold cooling water system.
Prevents the quality accident of contraction by clogging in the mold cooling water system.
Increases the durability of impellers and pipings, and efficiency of the flow velocity and water pressur (preventing deterioration of facilities and equipments).
Maximize the efficiency of oil cooler by descale (injection molding machine)

Comparison of Temperature and dfficiency afer Use (Using scale-removing agent)

It takes 40 minutes to increase the mold temperature by 18.8℃ from 30.7℃ to 49.5℃before scaling (0.47℃/min).

It takes 31 minutes and 2 seconds to increase the mold temperature by 22.5℃ from 27℃ to 49.5℃ after scaling (0.72℃/min).

Even if cooling water of the same temperature is used for circulation, the difference in mold temperature of 4.5℃ between before scaling (46.5℃) and after scaling (51℃) enables the shortened cycle time.
A mold, of which the mold temperature will not be decreased, is required elimination of scales for the first measure.

Specification

Spec./Model	1 zone	2 zone
Media operating temperature
Operating media	WATER
Temperature control method	PID Type Control
Heater capacity (Kw)	5Kw x 1	5Kw x 2
Media pump capacity (Kw)	1.1Kw x 1	1.1Kw x 2
Max. ejection flow (L/min)	100/M	100/M
Ejection pressure (Kg/㎠)	1 ~ 4	1 ~ 4
Size (W x L x H ㎜)	460 x 600 x 700 (+65)	750 x 1480 x 800
Applicable peripheral devices	Mold
Specification could be changed for improvement without preliminary notice, order for products of special specifications other than the above products is also available.

Supplied Water Distributor

Semi-permanent as it is made of stainless (SUS304)
Easy to install & use
Water Collecting Pipe for Supply and Distribution
(Design registration no. 0285259)